banner



Home  ›  How To Set A Time Clock

How To Set A Time Clock

Written By Sunday, June 26, 2022 Add Comment Edit

Download Article

Download Article

A plug timer is a great mode to control your lights, lamps, fans, holiday decorations, and more than without having to worry virtually turning them on and off manually. Want your fans on during the day and off at nighttime? Perchance you want your vacation lights on the reverse schedule? Using either a mechanical or digital plug timer, you tin can encompass all of these bases with minimal effort!

  1. 1

    Find the outlet closest to your device. For the all-time results, use your mechanical plug timer with an outlet as shut as possible to the device yous want to control. For example, if yous want to control the lights, place the light timer close to the lights. Just make sure to plug it straight into the outlet without any intermediate devices.

    • Don't use your plug timer with an extension cord or other types of electrical adapters. You too can't use them outside since the weather can mess with the circuit.[1]

  2. 2

    Flip the manual switch button to "Timer On" and insert the timer into the outlet. Although the switch color and location varies by product, they are often grey and located on peak of the unit. Afterward flipping the switch, double-check that your plug is dry out and connect information technology to the outlet. For outdoor apply, be sure to plug your timer to a basis-error circuit interrupter (GFCI) outlet to prevent shock.

    • Near products are set to "Outlet On" by default, which is the other selection aside from "Timer On."
    • When using your plug timer outdoors, let the switch hang downward at least 5 anxiety (1.5 yard) above the ground.
    • E'er shop your plug timer indoors when y'all're not using it.

    Advertisement

  3. 3

    Plow the punch clockwise to the current time. To set the plug timer to the electric current time, locate the bold arrowhead on the front of the timer. Later on locating it, plow information technology clockwise until it reaches the electric current fourth dimension and leave it in this position.

    • The assuming arrowhead is typically black in color across all models.
    • AM markings are typically in white, while PM marking are usually in gray.
    • Remember that each interval—divided past small lines under the numbers—represents 30 minutes.

  4. 4

    Pull or push the timer pins upward or down around the dial to prepare the device time. The pocket-sized gray slices on the dial are the timer pins—when they're up, the device is off, and when they're down, the device is on. Push down the pins during the fourth dimension frame you want the device to exist on and pull upwards the pins during the fourth dimension frame yous want the device to be off.

    • For instance, if you lot want your device to turn off at five AM and turn on at 5 PM, pull up each pin between 5 AM and v PM and leave the remainder of them down.

  5. v

    Connect your electrical device to your plug timer. Plug in your device to the timer and remember that your device's power button must be set up to "ON" for the plug timer to piece of work—fifty-fifty during periods when your plug turns it off. Be sure to never use devices that exceed the plug timer'due south maximum rating.

    • To avoid fires, don't connect your timer to appliances similar irons, heaters, and cooking appliances.
    • Switch the "ON/TIMER" push to "ON" to override the timer. To plow the timer back on, flip the switch dorsum to the "TIMER" position. On some models, the 2 options are "Ever On" and "Timer."

    6. Advertisement

  1. 1

    Press the reset button to erase the previous programming. The reset button is typically located on the right side of the plug timer'south face. Use a thin pointed object like a toothpick to hit information technology.

    • Although many products come ready to be programmed, always striking the reset button to be safe.

  2. two

    Set up the clock with the "Clock," "Hour," "Min," and "Week" buttons. Start by pressing the "Clock" button and holding it down. While holding information technology, press the "60 minutes" push consecutively until you reach the current hr. Now, while again holding the "Clock" button, press the "Min" push consecutively until the minute is correct. Finally, hold the "Clock" button and keep pressing the "Week" push button until the timer reads the correct twenty-four hours of the calendar week.[2]

    • Take note of AM and PM hours when setting your clock.
    • On some models, there is only a "Clock" button, which is used in conjunction with arrow buttons to select—using the "Prepare" button— the hr, min, and week on the LCD display.
    • If your model has an "On/Off" button and arrows, using the former to set the time after selecting the hour, min, and day with the latter buttons.

  3. 3

    Set your timer for different events using the "Program/Prog" push button. Each product has different capabilities, but tin can typically prepare to 8 or so events. The default "Program" display is "1 ON." As you lot press the "Program" button, the brandish cycles through each event: "one ON," "i OFF, "2 ON, "2 OFF," all the way until the maximum number of events. For each effect, set up the week (day of the consequence), hour, and minute, followed by the start fourth dimension—which is "# ON"—for the appliance as well as the stop time, which is "# OFF."

    • Press the "Week" button to cycle through each day or combination of days of the week. For example, "MoTuWeThFrSaSu" is every twenty-four hour period of the week, while "Mo," "Tu," "We," "Th," "Fr," "Sa," and "Su" each represent individual days. The other possibilities are combinations such every bit "SaSu" and "ThuFriSa."
    • Use the "Hour" and "Min" push to select the specific timing for the event, taking care to annotation AM and PM hours.
    • If your model has arrow buttons, use them to bike through the diverse options and select them with the "Set" button. If your model doesn't take this button, you likely have to use the "On/Off" push.

  4. 4

    Apply the "On/Off/Auto" button to brand the timer automatically operate your device. Each printing of the push cycles the device through "On, "Off," "Car On," and "Motorcar Off" settings. Prepare the plug to "On" to provide power to your device at all times and "Auto On" to provide it power until the adjacent "Off" time. Conversely, set the plug to "Off" to cutting power to the device at all times and "Motorcar Off" to remove power until the next "On" time.[iii]

    • Test your schedule with a fan or light then that y'all can easily see the changes.
    • The "On" option is the same as plugging your device directly into the outlet, and the "Off" setting is the same turning off its ability signal.

  5. 5

    Press "Hour" and "Min" simultaneously to activate daylight savings way. Afterward hitting "Hour" and "Min" at the aforementioned time, all of your settings will exist delayed past 1 hour. Typically, this fashion is shown as a clock to a higher place the black dot located in the lower correct-hand corner of the screen.

    • To remove daylight savings mode, press "Hour" and "Min" simultaneously.

  6. six

    Hold down "Week" and "60 minutes" simultaneously for random mode to power your device randomly. After hitting these buttons at the same time, an "O" volition appear above the clock symbol that flashes when the timer is operation. Random mode ways that the plug'south on and off timing is randomly delayed by a time that falls inside a specific interval, such as 2 to 32 minutes.

    • Utilise random way for lights to fool burglars into thinking you're home.
    • Printing "Calendar week" and "Hour" simultaneously to remove random mode.

  7. vii

    Plug the timer into an outlet, and so plug your device into the timer. Always connect your digital plug timer to the closest outlet to the device you want to control. Be certain to avoid using it with devices like extension cords and electrical adapters.

    • Always use a GFCI outlet when using your plug timer outdoors.
    • Permit the plug timer switch hang down to the basis at least 5 anxiety (one.five m) from the outlet.
    • Remember that your device needs to exist plugged into the timer to work.

    8. Advertizing

Add together New Question

  • Question

    How practice outlet timers work?

    Ricardo Mitchell

    Ricardo Mitchell
    Electrician & Construction Professional, CN Coterie

    Ricardo Mitchell is the CEO of CN Coterie, a fully licensed and insured Lead EPA (Environmental Protection Agency) Certified structure company located in Manhattan, New York. CN Coterie specializes in total dwelling house renovation, electric, plumbing, carpentry, cabinetry, article of furniture restoration, OATH/ECB (Role of Authoritative Trials and Hearings/Environmental Control Board) violations removal, and DOB (Department of Buildings) violations removal. Ricardo has over 10 years of electric and construction feel and his partners have over thirty years of relevant experience.

    Ricardo Mitchell

    Electrician & Construction Professional, CN Coterie

    Expert Answer

    They accept a congenital-in mechanism that lets you set up the outlet to work for a predetermined period of fourth dimension. They're a neat way to save on utility bills and cut back on the amount of ability yous're using.

  • Question

    Are plug timers safe?

    Ricardo Mitchell

    Ricardo Mitchell
    Electrician & Construction Professional person, CN Coterie

    Ricardo Mitchell is the CEO of CN Coterie, a fully licensed and insured Lead EPA (Environmental Protection Agency) Certified construction company located in Manhattan, New York. CN Coterie specializes in full dwelling house renovation, electrical, plumbing, carpentry, cabinetry, furniture restoration, OATH/ECB (Function of Administrative Trials and Hearings/Environmental Control Board) violations removal, and DOB (Department of Buildings) violations removal. Ricardo has over ten years of electric and construction experience and his partners have over thirty years of relevant experience.

    Ricardo Mitchell

    Electrician & Construction Professional person, CN Coterie

    Expert Respond

    The safest style to set a plug timer upwardly is to requite it a dedicated circuit. Mechanical timers are also going to be much safer than those outlet timers as well. You also accept to make sure that you lot don't use plug timers outside, since the weather and temperature shifts can mess with the wiring.

  • Question

    What are improve, the built-in timers or the outlet timers?

    Ricardo Mitchell

    Ricardo Mitchell
    Electrician & Construction Professional, CN Coterie

    Ricardo Mitchell is the CEO of CN Coterie, a fully licensed and insured Lead EPA (Environmental Protection Agency) Certified construction company located in Manhattan, New York. CN Coterie specializes in full home renovation, electrical, plumbing, carpentry, cabinetry, furniture restoration, Oath/ECB (Role of Administrative Trials and Hearings/Environmental Control Lath) violations removal, and DOB (Department of Buildings) violations removal. Ricardo has over ten years of electrical and structure experience and his partners accept over 30 years of relevant experience.

    Ricardo Mitchell

    Electrician & Construction Professional, CN Coterie

    Expert Reply

    The mechanical timers with an individual circuit are hands-downward the best options when information technology comes to safety and efficiently.

  • Question

    Tin you use a timer on a lamp that has a iii-way seedling?

    Jsnlin0

    Yes, y'all can. However, the timer won't exist able to change the bulb'southward brightness, so you will have to employ the knob on the light fixture in society to change the bulb'due south brightness.

  • Question

    When you set the timer and then plug the lamp in do yous turn the lamp on or off?

    R2_d2000

    The timer cannot control the switch on the lamp, so you demand to turn it on.

  • Question

    Can I apply my timer for turning on my java maker?

    R2_d2000

    Perchance. Some coffee makers outset making coffee as soon as they receive ability. In this instance, a timer will piece of work. Also, yous tin buy coffee makers that have built-in timers that you can use.

Enquire a Question

200 characters left

Include your electronic mail address to become a message when this question is answered.

Submit

Advertisement

  • Ever follow manufacturer's directions, as product instructions and pattern varies.

Advertisement

Warning

  • Never clean your plug timer when information technology's connected.

About This Commodity

Article Summary 10

Using a plug timer is a great way to have your lights or appliances go on and off at specific times of the day. First, plug your plug timer into the wall, turn information technology on, and plug your apparatus into it. If the plug timer's mechanical, plow the dial so the arrow lines upwards with the electric current time. Then, push button the pins down for the times yous desire your appliance to be on. If your plug timer'southward digital, use the buttons to set up the current time. And so, set up a program for the times and days you want your appliance to exist on. Many digital plug timers allow you to prepare multiple programs for different appliances or different needs. For more tips, including how to reset old programs on a digital plug timer, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 223,013 times.

Did this article help you lot?

Source: https://www.wikihow.com/Set-a-Plug-Timer

0 Response to "How To Set A Time Clock"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel